http://www.predatorwild.com/index.php Sun, 14 Mar 2010 17:25:51 +0000 200 http://www.predatorwild.com/public/style_images/ip-tech/feed.png http://www.predatorwild.com/index.php http://www.predatorwild.com/AR-Barrel-Length-Predators-t10075.html Sun, 14 Mar 2010 17:25:51 +0000 http://www.predatorwild.com/AR-Barrel-Length-Predators-t10075.html http://www.predatorwild.com/I-bought-stripped-night-t10029.html
Timney Trigger:

AR-15 Competition

ERGO Tactical Deluxe Grip:

Welcome to ERGO Grip Products

Undecided on upper 1/2, but I'm thinking a 20" bull barrel and leaning in this direction:

Rock River Arms: Predator Pursuit Upper Half

I'm anxious to start getting this thing assembled, but have to be patient. It will probably take at least a year to get it together.

Oh, and I picked up a bullet button for it while I was there too.]]> Sun, 07 Mar 2010 15:24:50 +0000 http://www.predatorwild.com/I-bought-stripped-night-t10029.html http://www.predatorwild.com/68-SPC-coming-t10020.html
I found a lightly used 18" fluted WOA 1:11 SPC II bbl with a mid-length gas system and matched WOA bolt. . Its muzzle threaded 5/8x24. Resulting top end has a full length YHM light rail forearm, a YHM Brake/FH built on an RRA flat top upper. FA Bolt carrier is from BCM. Rifle is set up with a 3-9x Pentax scope with the Ballistic Plex reticle.

Lower is one of two shared with other uppers. One is a BRO with SOPMOD and Bill Springfield 3# trigger. The other is a Stag with ACR and an RRA National Match trigger.

Here it is on the Stag lower:



(It usually does not have the vertical grip mounted.)

Have begun working up loads. Playing with 100 gr Accubond and cheaper 110 gr Sierra Prohunters. (Also expect to play with the 95 gr TTSX to be introduced later this year.) Here is one of the 100 yard groups so far. 4 of 5 formed the group in top of the black diamond. 5th is in the right side of the diamond and was a called flier. 4 of 5 group measures 0.364" Need to work on my bench some as it isn't deep enough to provide support for the rear of the rifle. Load is 29.5 gr H322 on SSA small primer cases with WSR primers. Upper was on the BRO lower when this group was shot.



(Group in the center of the diamond is 3 rnds from a .376/.416 Steyr Improved built on an FN Mauser action with home made custom scope mounts for a 1.8-5.5 Zeiss Conquest fitted with Leupold QRW rings. Is unusually good because the load was a 400 gr cast projectile w gas check.)

I think the 6.8 is going to work out fine. WIll have to get some more experience with the ARs to eliminate the flier problem.

MIke]]> Fri, 05 Mar 2010 18:04:14 +0000 http://www.predatorwild.com/68-SPC-coming-t10020.html http://www.predatorwild.com/AR-10-assembly-insturctions-pictures-t10005.html

Real Guns










]]> Thu, 04 Mar 2010 15:52:34 +0000 http://www.predatorwild.com/AR-10-assembly-insturctions-pictures-t10005.html http://www.predatorwild.com/Scope-t9972.html I was thinking of purchasing a AR 15 rifle scope from Leupold. 6 x 18 power. I know that there are a lot of scopes out there but has anyone used this scope. Also what scope do you have on your AR 15? Sun, 28 Feb 2010 14:53:35 +0000 http://www.predatorwild.com/Scope-t9972.html